When Connecting With A Rear View Camera - Pioneer AVH-P5700DVD Manual De Instrucciones

Ocultar thumbs Ver también para AVH-P5700DVD:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
Connecting the Units

When connecting with a rear view camera

When using this product with a rear view camera, automatic switching to video from a
rear view camera when the gear shift is moved to REVERSE (R) position is possible.
When connecting to a navigation unit, rear view mode also allows you to check what is
behind you while driving. For details, refer to the Operation Manual.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
The screen image may appear reversed.
The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a
tight parking spot. Do not use this function for entertainment purposes.
The object in rear view may appear closer or more distant than in reality.
20 cm
15 cm
Violet/white
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to
sense whether the car is moving forwards or
backwards.
Connection method
Note:
• It is necessary to set B-CAM to ON in SET UP
when connecting the rear view camera.
7
Rear view camera in
8 m
1.
Clamp the lead.
You must use a camera
which outputs mirror
reversed images.
RCA cable
(sold separately)
To video output
Extension lead (supplied)
Fuse resistor
CAUTION
rear view camera
2. Clamp firmly with
needle-nosed
pliers.
Fig. 4

Publicidad

Tabla de contenido
loading

Tabla de contenido