Harbor Breeze 40190 Manual De Instrucciones página 16

FINAL INSTALLATION
6 . Remove one of the three light plate screws (JJ) from
the light kit plate (L) and loosen the other two screws .
Connect the wire connectors (white to white and
black to black) from the motor assembly (E) to the
light kit fitter (D). Align the screw holes of the light kit
fitter (D) with the loosened light plate screws (JJ) and
replace previously removed lit kit plate screw (JJ) .
Tighten all screws .
Haodwaoe Used
Light Kit Plate
JJ
Screw
7 . Install bulbs (J) into the sockets on the light kit fitter (D).

Impootaat: Make sure you allow the bulbs (J) and
light kit to cool before you replace the bulbs .
8 . Attach the glass shade (I) to the light kit plate (L)
by twisting the glass shade (I) tightly in a clockwise
direction .
6
E
x 3
7
J J
8
16
L
JJ
L
I
Lowes.com/harborbreeze
D
D