Standard Or Angle Mounting Instructions - Harbor Breeze 40190 Manual De Instrucciones

STANDARD OR ANGLE MOUNTING INSTRUCTIONS

1 . Remove the downrod pin (EE) and downrod clip
(FF) from the downrod (A) . Then partially loosen the
motor housing set screws (GG) in the yoke at the top
of the motor housing (E) .
Helpful Hiat: Standard mounting is best suited for
ceilings 8 ft . or higher . For taller ceilings you may
want to use a longer downrod (not included) . Angle
mounting is best suited for angled or vaulted ceilings .
A longer downrod is sometimes necessary to ensure
proper blade clearance .
Haodwaoe Used
EE
Downrod Pin
FF
Downrod Clip
Motor Housing
GG
Set Screw
2 . Insert the downrod (A) through the canopy (B) and
yoke cover (F) . Thread the wires from the motor
assembly (E) through the downrod (A) .
1
FF
x 1
x 1
x 2
2
9
A
EE
A
E
Lowes.com/harborbreeze
GG
E
A
B
K
F