Wiring - Harbor Breeze 40190 Manual De Instrucciones

WIRING

WARNING: To reduce the risk of fire, electrical shock, or personal injury, wire connectors
provided with this fan are designed to accept only one 12 gauge house wire and two lead wires from
the fan . If your house wire is larger then 12 gauges and there is more than one house wire to connect
to the two fan lead wires, consult an electrician for the proper size wire connectors to use .
CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present .
1 . Connect supply and fan wires according to the
diagram and these steps:
• Connect the Green wires from the fan and the
mounting bracket (C) to the Bare/Green (ground)
supply wire .
• Connect the White wire from the fan to the White
supply wire .
• Connect the Black wire from the fan to the Black
supply wire .
• Secure all wiring connections together with wire
connectors (DD) .
Note: The Black wire is hot power for the fan . The
White wire is common for the fan and light kit .
The Green wire is the ground wire . If house wires
are different colors than referred to above, stop
immediately . It is recommended a professional
electrician determines the proper wiring .
Haodwaoe Used
DD
Wire Connector
2 . Wrap electrical tape (not included) around each
individual wire connector (DD) down to the wire .
1
FAN
2
x 3
DD
13
BLACK
WHITE
BARE/GREEN
WHITE
GREEN
BLACK
WHITE
DD
DD
Lowes.com/harborbreeze