Initial Installation - Harbor Breeze 40190 Manual De Instrucciones

INITIAL INSTALLATION

1 . Turn off the circuit breakers and the wall switch to the
fan supply line leads .
DANGER: Failure to disconnect the power
supply prior to installation may result in serious injury
or death .
2 . Determine the mounting method to use .

Note: Flushmount installation is not available for this
item .
Impootaat:
If using the angle mount, check to ensure
the ceiling angle is not steeper than 23° .
3 . Ensure the blades (H) will be at least 30 in . from any
obstructions . Also check the downrod (A) length to
ensure the blades (H) will be at least 7 ft . above the
floor.
1
2
Downrod Mounting
Flushmount
3
A
7
Angle Mounting
Closemount
30 in.
Minimum
H
7 ft.
Minimum
Lowes.com/harborbreeze