LGB Ge 4/4 II Manual De Instrucciones página 10

Register Assignment
CV 1 Address
CV 2 Starting voltage
CV 3 Acceleration delay
CV 4 Braking delay
CV 5 Max. voltage
After entry of CV 6 (when programming with older 55015 units) function value in
CV 5
the register to be programmed
CV 6 CV number of the register to be programmed
Bit 0 = Direction of travel
Bit 1 = Number of speed levels (14/28)
CV 29
Bit 2 = Mode of operation (digital / analog+digital)
Bit 5 = short / long address
Hand-off function and "Back-EMF"
0 = hand-off function off, "Back-EMF" off
1 = hand-off function on, "Back-EMF" off
2 = hand-off function off, "Back-EMF" on
CV 54
3 = hand-off function on, "Back-EMF" on
Hand-off function on: When operating with 55015, you can adjust direction and
speed for two seconds after selecting a moving loco without causing the loco
to stop.
CV 55 Reset
10
Range Default
00 – 22 3
0 – 255 2
1 – 255 3
1 – 255 3
1 – 255 255
0/1
0/2
4
0/4
0/32
0 - 3 2
55