Register
Assignment
CV 60
"Back-EMF": Max. adjustment factor
CV 61
"Back-EMF": Adjustment frequency
CV 62
"Back-EMF": Maximum adjustment
Sound
The volume control is located underneath the model on the
left behind the first power truck (Fig. 5).
The whistle also can be triggered by the LGB Sound Magnet
(17050) included with this model. The 17050 snaps between
the ties of most LGB track sections. The magnet in the 17050
is under the LGB logo. If the contact is installed with the
logo on the right side of the track (in the direction of travel),
it will trigger the whistle as the model passes.
Pantographs
The model is equipped with electronically controlled
pantographs. The rear pantograph raises, and the front pan-
tograph lowers automatically, depending on the direction of
travel. The pantographs can be fixed in the "down" position
by snapping them into their holders.
Controllable Functions
Lighting
Whistle
Brake sound
Raise/lower pantographs (with sound)
Train departure announcement
Train announcement
Off/on for parking the loco
Change pantograph settings: rear panto-
graph up/both pantographs up
Sound off/on
Range
Default
1 – 255
2
0 – 255
32
0 – 255
255
1
2
3
4
5
6
7
8
11