Operating - ABB EOHU Serie Boletín De Instrucciones

Operation

Operating

Closing the enclosure and operation to the ON-position
Close the enclosure door and the latches according to the
picture. Operate switch to the ON-position.
NOTE: The door must be closed and fastened securely with
the door latches before the switch is operated.
1
Instruction Bulletin EOHU364K, EOHU365K, EOHU366K, 1SCC340037M1401 / A | Operation 1/15
3
CAUTION
HAZARD OF INJURY OR EQUIPMENT DAMAGE
Do not in any circumstances bend or twist the locking hook fixed on
the door. Wrong position of the door hook causes the malfunction of
the locking mechanism that may result in personal injury or equipment
damage.
Failure to follow these instructions can result in injury or equipment damage.
CAUTION
HAZARD OF INJURY OR EQUIPMENT DAMAGE
Do not force the handle to the ON (I) position with the door open. When
the door is open, the mechanism interlock prevents the switch blades
from closing and the handle from fully rotating.
Failure to follow these instructions can result in injury or equipment damage.
1
2