Installation - Installation; In Conjunction With Operating Elements - ABB 6402U-500 Manual De Instrucciones

Installation
Switch off supply voltage!
4.1 Installation of Insert 6402 U-500
Insert 6402U-500 is installed in a conventional FM device
box in accordance with DIN 49073, Part 1.
4.2.1 Installation in conjunction with Operating Ele-
ments
Installation Site (see Fig. 3 and 4)
When used in conjunction with IR Operating Elements
6066- ... and 6067- ... , the installation site should be within
the specified values for the IR reception range. In this
context, please note that the IR reception range can change
due to ambient light (e.g., solar radiation, lighting).
To fit the Operating Element
Prior to fitting IR Operating Elements 6066-... and 6067-... , set
the desired address. Clip the operating element onto Insert
6402 U-500.
To remove the Operating Element
Use the notches on the left and right to lift off the operating
element.
70
GB
70