Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4. PREPARATORY WORKS
4.3 ADJUSTING HEADREST
IMPORTANT
A correctly adjusted headrest ensures optimal
protection for your child in the safety seat.
When installed by 5-point harness, the headrest
must be adjusted so that the shoulder belts are at
the same level as your child's shoulders (fig. 7)
CAUTION
The shoulder belts must not run behind the
back of the child or at ear height or above
the ears.
When installed by 3-point vehicle belt, The headrest
must be adjusted so that there is a space two
fingers wide between the headrest and your child's
shoulders. Make sure the diagonal seat belt section
is on child's shoulder but not on neck. (fig. 8).
1. First loosen harness.
2. Pull up the headrest height adjuster at the
same time move headrest to shoulder height in
accordance with the size of the child (fig. 9).
4.4 ADJUSTING RECLINE POSITIONS
Pull Recline lever at the same time incline seat to
intend position (fig. 10).
CAUTION
Adjust to most reclined position when installed
rearward facing.
28
4. PREPARATORY WORKS
4.5 ROTATING SEAT
7
Rearward facing
Only for group 0+.
1. Press down rotation button at the same time
rotate seat to intend direction. (fig. 14, 15).
2. When seat rotates to intend direction, rotation
8
button will bounce and make click sound. Then
try to rotate seat to make sure seat is locked (fig.
16).
9
4.6 ADJUSTING ISOFIX
If your vehicle is not equipped with the ISOFIX insert
10 10
guides as standard, clip the two insert guides which
are included with the seat. with the cut-out facing
upwards onto the two ISOFIX attachment points of
your vehicle.
TIP:
The ISOFIX attachment points are located
between the surface and the backrest of the vehicle
seat.
11
12
11
Forward facing
Lateral facing
Only for group 1/2/3.
For child sit convenience.
use when driving
14
15
CLICK
13
!
warning
forbidden to
.
16
17
29
Publicidad
Tabla de contenido
