Care And Maintenance - BQS BVO FIX 0123 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6. CARE AND MAINTENANCE

6.1 CARE FOR THE BUCKLE
It is vital for the safety of your child that the harness
buckle works correctly. Malfunctions of the harness
buckle are usually caused by accumulations of dirt
or foreign bodies.
Malfunctions are as follows:
• The buckle latches are ejected only slowly when
the red release button is pressed.
• The buckle latches will no longer lock home (i.e.
they are ejected again if you try to push them in).
• The buckle latches engage without an audible
"click".
• The buckle latches are difficult to insert (you feel
resistance).
• The buckle only opens if extreme force is applied.
Solution
Wash out the harness buckle so that it functions
properly once again, cleaning the harness buckle.
1. Follow section 4.8 to Remove the harness
buckle.
2. Soak the harness buckle in warm water with
washing-up liquid for at least an hour. Then rinse
and dry it thoroughly.(fig.62)
6.2 CLEANING
The cover can be removed and washed. Please
observe the instructions on the washing label of the
cover.
First remove harness see 4.8, then take off fabric
cover. (fig, 63, 64). Re-fitting, simply follow the steps
in the opposite order.
1. To wash belts and plastic parts, use neutral
detergent and warm water.
2. Ensure that soap does not enter inside the buckle or
metal pieces.
3. Do not use chemical products or bleach on any part
of the child seat.
38
6. CARE AND MAINTENANCE
WASHING INSTRUCTIONS:
62
- The cover can be removed
and washed at 30 °C. It
should only be air-dried.
- Machine wash, cold.
- Do not use bleach.
If you have any doubts about using or installing this product, or you need a
replacement part, please get in touch with our customer service team.
7. GUARANTEE
63
This product is covered by a legal warranty under the terms and conditions in Royal
Legislative Decree 1/2007, from the 16th of November. For a period of 2 years after the
date of purchase, any lack of conformity existing at the time of delivery of the product
is covered. It is essential to keep the purchase ticket or invoice proving the purchase
of the product within the warranty period. The instructions for use given in the product
manual must be followed carefully for its start-up, as well as for the subsequent and
proper operation of the product. This warranty does not cover defects arising from
accidental deterioration, misuse, abuse of the product, improper maintenance, or
64
repair by unauthorised technical personnel or service, in which case the user shall
bear the costs of delivery and, where applicable, the repair. The warranty does not
cover consumable components, such as batteries or coatings exposed to wear and
tear, that are the result of normal use of the product.
- Dry clean, any solvent
30 °C
except trichlorethylene.
- Do not use a dryer.
- Do not iron.
39

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

St-3

Tabla de contenido