ASSEMBLY INSTRUCTIONS – NEW CONSTRUCTION ONLY
BEFORE INSTALLATION
Turn off power source. Review all safety precautions.
1.
If spacing between joists is 12 in. apart, use 4 long wood
screws (AA) to attach the fan body (A) to the ceiling joists.
NOTE: Suspension brackets are not needed.
Hardware Used
AA
Long wood screw
2.
For joist spacing 16 in. - 24 in., insert suspension bracket I
(C) into the bracket cover on the duct connector side.
Then, attach suspension bracket II (D) and suspension
bracket III (E) to the back of the fan body (A).
3.
Secure the fan body (A) to joist with suspension brackets
(D, E) using long wood screws (AA).
Hardware Used
AA
Long wood screw
4.
Secure the suspension brackets (D, E) to fan body (A)
using short machine screw (BB).
Hardware Used
BB
Short machine screw
1
x 4
2
E
3
AA
x 6
4
x 1
E
6
A
AA
A
A
D
AA
E
A
D
BB
Lowes.com
C
D