Cameo Studio PAR 64 CAN Manual De Usuario página 10

MODE SELECTION:
COLOUR JUMPING MODE
Press the MODE button repeatedly if necessary to select the Colour Jumping
Mode (JXXX). Press ENTER (2. digit blinks) to select the 15 colour jumping
function (JUXX) or the strobe function (JFXX) by using the UP and DOWN
buttons.
Press ENTER again (3. and 4. digit blink) to adjust jumping speed (JU00 -
JU99) and strobe speed (JF00 - JF99) by using the UP and DOWN buttons.
Press ENTER to confirm.
Note: It is possible to use the colour jumping function and the strobe function
simultaneously.
RGBA 15 COLOUR
Jumping speed JU00 - JU99
STROBE
Speed JF00 - JF99
COLOUR FADING MODE
Press the MODE button repeatedly if necessary to select the Colour Fading
Mode (FXXX). Press ENTER (2. digit blinks) to select the 15 colour fading
function (FAXX) or the strobe function (FFXX) by using the UP and DOWN
buttons. Press ENTER again (3. and 4. digit blink) to adjust fading speed
(FA00 - FA99) and strobe speed (FF00 - FF99) by using the UP and DOWN
buttons. Press ENTER to confirm.
Note: It is possible to use the colour fading function and the strobe function
simultaneously.
RGBA 15 COLOUR
Fading speed FA00 - FA99
STROBE
Speed FF00 - FF99
10