Overview Of The Control Panel - Samsung DV5471A Serie Manual Del Usuario

operating Instructions, tips

OVERVIEW OF THE CONTROL PANEL

1 2
Digital Graphic
1
Display
Select Cycle
2
Option
DV5471AE-03022A-02_EN.indd Sec6:25 DV5471AE-03022A-02_EN.indd Sec6:25
3
The display window shows the estimated time remaining in the cycle after you
have pressed the Start/Pause button. The estimated time remaining may fl
uctuate as the cycle progresses.
The Drying light will illuminate and remain lit until the cycle is complete.
When your dryer is in the cool-down phase, the Cooling light will illuminate. When
your dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will illuminate.
When the cycle is complete, "END" will appear in the display panel until you
push the Start/Pause button or the Power button. If your dryer is paused during
a cycle, the indicator lights will blink until you press the Start/Pause button.
Adjust Time – You can add or subtract time from the automatically set times
in the Wrinkle Away cycle and the Manual Dry cycles (Time Dry, Quick Dry, or
Air Fluff cycles.)
To add or subtract time from the cycle, press the Adjust Time arrow pad up
or down until the desired time is displayed.
Wrinkle Prevent -Wrinkle Prevent provides approximately 180 minutes
of intermittent tumbling in unheated air at the end of the cycle to reduce
wrinkling. Press the Wrinkle Prevent button to activate this feature.
The indicator light above the pad will illuminate when you select Wrinkle Prevent.
The load is dry and you can remove it at any time during the Wrinkle Prevent cycle.
Rack Dry (DV5471A*) – Rack Dry is available at Time Dry cycle. Temperature
will be set only to Extra Low. (See page 29 for detail.)
Mixed Load Bell (DV5471A*) - This is an alarm that notifi es you when the
average dry level of a mixed load with various types of cloth is damp dry
(80% dried). When this level is reached, an alarm sounds for fi ve (5) seconds.
After the alarm sounds, the dryer will continue to run until you turn it off or the
clothes reach the level of dryness you selected at the start of the cycle.
You can select this function only when you select one of the Sensor Dry cycles.
Signal – When the cycle is complete, a chime will sound.
When you select the Wrinkle Prevent option, the chime will sound intermittently.
Adjust the volume of the chime or turn it off by pressing the Signal button.
Press the button repeatedly to scroll through the choices.
4 5 6 7
operating Instructions, tips _25
2011-04-12 2011-04-12
8
11:37:32 11:37:32