Installation Procedure - Toto TBV01101U Manual De Instalación Y Del Propietario

I. Preparing the Trim installation area
1. Use hacksaw to remove excess
portion of outer plaster guard that
extends from the wall surface. The
space between the convex edge of
the outer plaster guard and the
wall surface needs to be within
1/16" (2mm).
WARNING:
● Keep a neat edge and make
sure no edges are recessed
into the wall surface when
removing the outer plaster
guard for the valve.
● When cutting, the plaster
guard may get scratched, this
does not adversely affect the
product.
2. Apply silicone caulk uniformly and
cover the gap between the outer
plaster guard and the wall surface.
Make sure adhesive is applied
evenly and not convex to the wall
surface.
3. Remove and discard the inner
plaster guard.

INSTALLATION PROCEDURE

Hacksaw
Outer plaster guard
Outer plaster guard
4
Within
1/16"
(2mm)
Silicon caulk
Inner plaster guard