Charging The Shaver - Braun FreeGlider 6610 Manual De Instrucciones

Charging the shaver

• Using the special cord set, connect the shaver to an
electrical outlet and charge it for at least 8 hours (shaver
and adapter might get warm). Once the shaver is
completely charged, shave without the cord until fully
discharged. Then recharge to full capacity again.
• When the shaver is completely discharged, you cannot
know if it is switched on or not. When you connect the
shaver to an electrical outlet, make sure the green
charging light illuminates. If it does not, push the start/
stop button (turning off the shaver). The shaver is only
charging when the green light is on.
• A full charge will give up to 30 minutes of cordless
shaving time depending on your beard growth. However,
the maximum battery capacity will only be reached after
several charging/discharging cycles.
• Best environmental temperature range for charging is
60 °F to 95 °F / 15 °C to 35 °C.
The green charging light shows that the shaver is being
charged. When the rechargeable battery is fully charged,
the green charging light intermittently blinks on and off.
This indicates that the battery maintains its full capacity.
Preserving the rechargeable battery
In order to maintain the optimum capacity of the
rechargeable battery, the shaver has to be fully dis-
charged (by shaving) every 6 months approximately.
Then recharge the shaver to full capacity again.
stop stop
7