Getting Started; Automatic Operation, Step By Step - Irritrol Rain Dial Plus 6 Guia Del Usuario

Getting Started

Set the Time
• Turn the Dial to Time
• Press the +/- Buttons to set the current time (note AM or PM).
Set the Date
• Turn the Dial to Date.
• Press the +/- Buttons to change the year shown on the display.
• Press the Next Button; then press the +/- Buttons to change the month
(JAN, FEB, etc.) shown on the display.
• Press the Next Button; then press the +/- Buttons to change the date.
• Press the Next Button to display the day of the week that automatically
corresponds to the date you have set.

Automatic Operation, Step by Step

1. Set the Function Switch to Set Program
2. Set the Program Selector Switch to A, B or C program.
3. Turn the Dial as follows to select ONE of the watering day schedule options:
Daily Schedule
Turn the Dial to Sun (Sunday). Press the +/- Buttons for ON or OFF.
Repeat for each day of the week.
Note: If a Skip Days or Odd/Evn schedule is in use, it must be set to "OFF" before a
Daily schedule can be set. (See page 19, "What the Display Means.")
Skip Days Schedule
Turn the Dial to Skip Days. "SKIP" is displayed. Press the +/- Buttons to
set the day interval between watering (01 – 15 days). For example, to
water every day, set 01. To water every third day, set 03, etc.
.
.