Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
1
Battery cartridge
2
Reflector (ML142 only)
3
Fluorescent tube
4
Lamp cover
5
Screw ring
SPECIFICATIONS
Model
Power source
Fluorescent tube
Dimensions
347 mm x 94 mm x 116 mm
(L x W x H)
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock,
and personal injury, including the following:
READ ALL INSTRUCTIONS.
1.
Read this instruction manual and the charger instruction manual carefully before use.
2.
This tool is not water-proof. Do not use it in damp or wet locations. Do not expose it to rain or snow. Do
not wash it in water.
3.
A short-circuit can cause a large current flow, overheating, possible burns and even a breakdown.
(1) Do not touch the battery terminals with any conductive materials.
(2) Avoid storing the battery cartridge in a container with any metal objects such as nails, coins, etc.
4.
Never expose the battery cartridge to flames, fire or great heat. Breakage may cause release of injurious
material.
5.
Do not disassemble the charger or battery cartridge; take it to a qualified serviceman when service or
repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
6.
When the tool is not in use, always switch off and remove the battery cartridge from the tool.
7.
Do not give the tool a shock by dropping, striking, etc.
8.
Do not expose the light to eyes continuously. It may hurt them.
9.
Do not cover or clog the lit tool with cloth or carton, etc. It may create a risk of fire.
10. If you notice that the tool is hot or in abnormal condition, consult your nearest Makita Service Center or
dealer. When the switch is turned "ON", the handle of the tool may become slightly hot, even if the fluo-
rescent tube is not installed or is not lighted. This is a normal condition and does not indicate problem.
11. If any problem develops, consult your nearest Makita Service Center or dealer. To maintain product safety
and reliability, repairs, maintenance or adjustment should be carried out by Makita Authorized Service
Center.
12. Switch off the light immediately when the lamp gets dark in use. If you leave the lamp switched on, the
battery cartridge capacity may decrease.
SAVE THESE INSTRUCTIONS.
4
Explanation of general view
6
Switch
7
Hook (ML142 only)
8
Strap (ML142 only)
9
Loosen
10 Tighten
ML142
D.C. 14.4 V
Compact FL13 W
0.35 kg
ML143
D.C. 14.4 V
Compact FL13 W
411 mm x 94 mm x 116 mm
(when the hook is pulled out)
350 mm x 94 mm x 116 mm
(when the hook is stored)
0.37 kg
11 Connecting ring
12 Cap
13 Ring
14 Metal fitting
15 Hook (ML143/183 only)
ML183
D.C. 18 V
Compact FL13 W
411 mm x 95 mm x 154 mm
(when the hook is pulled out)
350 mm x 95 mm x 154 mm
(when the hook is stored)
0.37 kg
Publicidad
Tabla de contenido
