Publicidad
Idiomas disponibles
Idiomas disponibles
Front
of
vehicle
16. Insert rails (#1) as shown in the following steps (Figures 9 through 11). Rails should be inserted flat side up.
Front Hat Channel
Fuel
Cell
F
r
a
m
e
Rear Hat Channel
Fuel
Cell
Fuel
Cell
30126N
05/23/14
REV F
Figure 9
Figure 10
Figure 11
PCN3694
©2011, 2014 CEQUENT PERFORMANCE PRODUCTS, INC.
Rail positions
Step 16A : Insert the first rail from the
F
r
passengers side rear wheel well
a
above the frame. Rest the rail on
m
both chassis frame rails (Figure 9).
e
Step 16B : Slide the rail rearward,
parallel with axle, resting on both
frame rails, and as close as possible
to the rear hat channel (Figure 10).
Step 16C : Insert the second rail from
the passengers side rear wheel well
above the frame. Rest the rail on both
chassis frame rails (Figure 11).
Vehicle
Forward
PRINTED IN MEXICO
Figure 8
6
Publicidad
