Hioki CM4375 Manual De Instrucciones página 11

• Do not allow the instrument to get wet, and do not take measurements with
wet hands. This may cause an electric shock. (This precaution does not
apply to insulated conductors.)
• To prevent an electric shock, do not exceed the lower of the ratings shown
on the instrument and test leads.
Do not place any foreign object between the jaws or any insert foreign
object into the gap of the sensor head. Doing so may worsen the
performance of the sensor or the opening-closing operation of the
sensor head.
Avoid dropping or jarring the instrument, which could damage the jaw,
adversely affecting measurement.
Attach the clamp around only one conductor. If you clamp single-
phase (2-wire) or three-phase (3-wire) conductors together, the
instrument will not be able to make a measurement.
WARNING
CAUTION
Usage Notes
1
2
3
4
5
6
索
引
7