Building Standards & Regulations; Safety Information - Baxi SILA RCT MINI Instrucciones De Instalación, Funcionamiento Y Mantenimiento

ENGLISH
TERM.BLOCK
DIP SWITCH
RV2
FRESH
AIR
IN
BUILDING STANDARD & REGULATIONS
The appliance must conform to those in the contry where it's used.

SAFETY INFORMATION

Ensure the mains supply voltage, frequency, number of phases and power rating comply with details on the rating
label unit.
All wiring must be in accordance with the appropriate standards. The equipment must be provided with a local triple pole
isolator switch.
Ensure safety regulations and practices are adhered to when installing and using this equipment.
Do not install this appliance where it is liable to be subject to water spray or where ducted air ambient temperature may
exceed 40˚C.
When the unit is used to handle moist air, a suitable condensate trap and drainage system should be incorporated in the
exhaust duct to ensure safe and healthy operating conditions as per the relevant standard.
DO NOT use this appliance where excessive moisture, excessive dust or fibres, grease or oil laden air.
When installing the unit, take care not to damage electrical or other hidden utilities.
Exhaust air must be vented to the outside.
The fan motors are fitted with sealed for life bearings and therefore does not require lubrication.
BLINKING
RED LED
TERM.BLOCK
INSTALLER MODE SWITCH
PULSANTE INSTALLATORE
RV1
EXHAUST
AIR
OUT
2b
19
18
Main PCB
FILTERS
20 21
49