Installation Instructions - Baxi SILA RCT MINI Instrucciones De Instalación, Funcionamiento Y Mantenimiento

ENGLISH

INSTALLATION INSTRUCTIONS

NOTE: The installation should be carried out by a competent person in accordance with the appropriate authority and
conforming to all the statuary and governing regulations.
When location of the unit has been chosen, fix the unit using the 2 fixing brackets, (you must make sure you have the
correct bracket on the fall side of the unit), use screws appropriate for the surface it is being fitted to. Ensure the unit is
positioned with the fall side towards the correct handed condense drain point.
Figure 7. Fixing brackets screw holes for ceiling mountaing
7
Condensate drain
The condensate drain can be provided by connecting the drain outlets to two flexible hoses.
To avoid the formation of air bubbles, create two siphon traps in the hoses connected to the the appliance denoted
1and 2, as illustrated in Fig. 9b.
Cut the end of the hose obliquely.
N.B.
The siphon must be created observing the dimensions indicated in Fig. 9c; otherwise,proper working of the appliance
cannot be guaranteed.
Condensate can also be drained off through the waste plumbing system of the building.
9 9a 9a
1
NO
54
FIXING HOLES
9 9b 9b
2
Figure 8. Fixing brackets for ceiling mounting
8
1 2
OK
BRACKETS
9 9c 9c
∆
h > 50 mm
≥ 60 mm