Selecting The Type Of Unit The Telephone Is To Be Connected To For The Video Entry Functions; Resetting Default Settings - Bpt IMT/200 Manual De Instrucciones

Selecting the type of unit the
telephone is to be connected
to for the VIDEO entry functions
Lift the receiver
or
press the hands-free key.
Press the PROGRAMMING
key.
PQRS
Press key 7.
7
Press key 1 if the telephone
1
is connected with the bpt
telephone interface.
Press key 2 if the telephone
ABC
2
is connected with a CT1/6 or
CT2/8 PABX telephone swit-
chboard.
Press key 3 if the telephone
DEF
3
is connected with a CT1/6U,
CT2/8U or CT2/8E PABX
telephone switchboard.
Press key 7 to complete the
PQRS
7
setup.
Press the PROGRAMMING
key.
Replace the receiver
or
press the hands-free key.
PROGRAMMING

Resetting default settings

0
WARNING. By this operation all stored num-
bers will be cancelled.
27
Lift the receiver
or
press the hands-free key.
Press the PROGRAMMING
key.
Press key 0 twice.
0
Press the PROGRAMMING
key.
Replace the receiver
or
press the hands-free key.