White Balance; Continuous Shooting; Backlight - Medion MD 85733 Manual De Instrucciones

Producing photos

White balance

The camera sets the white balance automatically.
If you notice a colour imbalance on the LC
display after taking a photograph then
change the white balance setting.
Take the photograph again.
The following settings are available:
Setting Clarification
Auto Factory setting. The camera
sets the white balance
automatically.
Daylight For shots taken in daylight.
Fluorescent For shots taken in fluorescent
light light.
Light bulb For shots taken in electric
light.
56

Continuous shooting

This setting enables five photographs to be taken
in quick succession.
Place the camera on a level surface or use a
tripod in order to prevent the shots from
being out of focus.
The setting is active for one shoot only. The
camera then returns to normal shooting
mode.

Backlight

This setting enables you to take photos against
the sun or other sources of light.
The setting will be active until you select
another one or switch the camera off.