Reference Description - GALAGAR GALA 1700 G.E. TIG PULSE Manual Técnico De Instrucciones

1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.
The GALA G.E. TIG PULSE SERIES are single-phase electronic technology appliances (INVERTER) designed for use
as a continuous current source for coated electrode and TIG DC welding process. These equipments have a
protection system, which means they can be installed, without any danger of failures, in low quality supply networks
and electrical generating sets.
The welding current is controlled by a microprocessor that enables the user to design the most suitable current
form for the welding job. The equipment is able to memorise up to 8 groups of welding parameters (jobs).
Technical characteristics GALA G.E. TIG PULSE. Data according to standard EN 60974-1
Technical characteristics.
Supply voltage (U
1
Maximum primary intensity (I
Effective input intensity (I
Protection against connection at 400V
Suitable for generating set.
No-load voltage (U
Continuous adjustment margin. (I
Maximum welding intensity I
Rated welding intensity X%=100% (I
HOT START function (Arc-striking aid).
M.M.A.
ARC FORCE function (ARC FORCE)
Antisticking function (ANTISTICKING).
Remote control
TIG continuous adjustment margin. (I
Maximum welding intensity I
Maximum welding intensity I
Rated welding intensity X%=100% (I
2-S LIFT ARC mode (Selectable pulse arc)
2-S HF mode (Selectable pulse arc)
T.I.G.
4-S HF mode (Selectable pulse arc)
SPECIAL 4 T mode (DOUBLE CURRENT)
Parameter memorisation (2 memories per mode)
Remote control
Mechanical protection degree IP
Dimensions W x H x L (mm)
Weight (kg).
1.1 ACCESSORIES.

REFERENCE DESCRIPTION

002.59.040 Box of complete accessories for electrode welding.
301.44.000.V Electronic protection shield (Automatic-Professional).
376.00.000 Argon pressure reducing valve – Mod. EN 2
376.00.515 Argon pressure reducing valve with rotameter – Mod. EN 2
180.51.714 Torch model SR 17, with 4 m and pushbutton
190.52.614 Torch model SR 17, with 8 m and pushbutton
504.12.080 TIG torch accessory connector assembly.
505.12.095 Remote control for electrode (MD MMA 2000 PULSE)
505.12.096 Remote pedal for TIG (MD TIG 2000 PULSE)
USE ONLY THE RECOMMENDED SPARE PARTS AND ACCESSORIES.
– 1Ph. 50/60 Hz)
)
1max
)
1eff
)
2o
2min
/Duty cycle. (40º C)
2max
/Duty cycle. (25º C)
2max
/Duty cycle. (40º C)
2max
NEVER USE THESE WELDING MACHINES TO DEFROST TUBES.
GALA GAR has a complete range of welding accessories where you can find those most
suited to your needs.
GALA G.E. TIG PULSE
- I )
2max
) (40º C)
2n
- I )
2min 2max
) (40º C)
2n
GALA 1700 GALA 2000
Ref.: 504.00.000 Ref.: 505.00.000
230 V ± 15% 230 V ± 15%
45 A 45 A
26 A 26 A
•
•
92 V 92 V
30÷140 A 30÷200 A
140 A/35 % 200 A/35 %
80 A 120 A
•
•
•
•
5 ÷160 A 5 ÷200 A
200 A/40 %
160 A /35 % 200 A /35 %
100 A 130 A
•
•
•
•
•
•
IP 21 IP 21
161x 334 x 505 161x 334 x 505
10,9 Kg 12,5 Kg
14
•
•
•
•
•
•
•
•
•
•
•
•