Tripp-Lite SNMPWEBCARD Manual De Instalación página 10

Installation
Access options to these facilities are rw, ro or none.
For Example:
default=rw indicates the user has read write access to every facility not
otherwise specified. This is the level of access user "localadmin" has.
default=rw, security=none indicates that the user has rw access to every
facility, but due to the addition of the security facility tag, the user would be
restricted from the security settings of the program.
Allowed IP address or Address range, v6 or tunneled v4, "::" means any
address
IP address Mask in v6 notation, "::" means any
IPv4 Example:
To allow anybody with an address of 10.X.X.X to have access, enter
Address:
::ffff:10.0.0.0
Mask:
ffff:ffff:ffff:ffff:ffff:ffff:ff00:0000
To allow anybody with an address of 10.20.X.X to have access, enter
Address:
::ffff:10.20.0.0
Mask:
ffff:ffff:ffff:ffff:ffff:ffff:ffff:0000
To allow anybody with an address of 10.20.1.X to have access, enter
Address:
::ffff:10.20.1.0
Mask:
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ff00
13-01-199-933179.indb 10
10
4/23/2013 4:01:50 PM