Tripp-Lite SNMPWEBCARD Manual De Instalación página 19

Features
PS/2 Port: Use this port to connect a Tripp Lite ENVIROSENSE
A
environmental sensor to provide remote temperature/humidity monitoring
and a dry contact interface to control and monitor alarm, security and
telecom devices. Contact Tripp Lite Customer Support at
(773) 869-1234 for ordering information. Note: Do not connect a
keyboard or mouse to this port.
Mini-DIN Serial Port: Use this port to provide a direct terminal
B
connection to a computer with a terminal emulation program. A serial
cable (part number 73-1025) is included with the SNMPWEBCARD. If
you need to order a replacement cable, contact Tripp Lite Customer
Support at (773) 869-1234.
Ethernet Port: Use this RJ-45 jack to connect the SNMPWEBCARD to
C
the network with a standard Ethernet patch cable. The Link LED
Status LED
table below. Does not support PoE (Power Over Ethernet) applications.
SNMPWEBCARD Operating Conditions
Link LED Color
C1
Off
Flashing Amber
Flashing Green
Status LED Color
C2
Off
Steady Green
Flashing Amber
13-01-199-933179.indb 19
indicate several operating conditions, as shown in the
C2
A
A
C
B
B
C1
C1
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
19
and
C1
C2
C2
4/23/2013 4:01:52 PM