Care And Cleaning; Troubleshooting - ETI Solid State Lighting RK-72-850-MV-D Guía De Uso Y Cuidado

Care and Cleaning

CaUTiOn: Before attempting to clean fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the
fuse box.
□ Clean the fixture with a soft, dry cloth.
□ Do not use cleaners with chemicals, solvents, or harsh abrasives.
□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.

Troubleshooting

Before doing any work on the fixture, disconnect power to the light fixture.
WarninG:
Minor problems often can be fixed without the help of an electrician.
Problem Possible Cause
The fixture will not light. The power is off.
The circuit breaker is off.
There is a bad connection.
There is a defective switch.
The fuse blows or the circuit breaker The wires are crossed or the power
trips when the light is turned on.
wire is grounding out.
Solution
Ensure the power supply is on.
Ensure the circuit breaker is in the on position.
Check to ensure proper wire connections are made.
Contact a qualified electrician.
Contact a qualified electrician.
Check the wire connections.
Contact a qualified electrician or call customer
service 1-855-384-7754.
Questions, problems, missing parts?
Call ETiSSL Customer Service
8 a.m. - 5 p.m., CST, Monday - Friday
1-855-ETI-SSLI (1-855-384-7754)
www.ETiSSL.com
Retain this manual for future use.
GUide d'UTiLisaTiOn eT d'enTreTien
deL nÉCessaire de MOdernisaTiOn À deL POUr aPPareiLs
d'ÉCLairaGe FLUOresCenT
Questions, difficultés, pièces manquantes?
Téléphonez au service à la clientèle de ETiSSL
8 h - 17 h, HNC, du lundi au vendredi.
1-855-ETI-SSLI (1-855-384-7754)
www.ETiSSL.com
Nous apprécions la confiance que vous avez accordé à la ETi Solid State Lighting, Inc. en achetant ce Nécessaire de modification à DEL.
Consultez notre gamme complète de produits. Nous vous remercions d'avoir choisi ETi!
n° de commande 64101162
n° de pièce rK-72-850-MV-de
rK-72-840-MV-de
n° de certification 64101162
MERCI
00000000
00000000