Initial Signal Connections; Digital (Dtv) Antenna Connection; Analog Rf Antenna Connection; First-Things-First (Required Initial Setup) - Sanyo HT32744 Manual De Instrucciones

This new high-definition digital television is capable of reproducing a crystal clear
picture and exceptional sound. The signal makes the difference!
1

INITIAL SIGNAL CONNECTIONS

Digital (DTV) Antenna Connection

•
Connect an RF antenna to the Digital Antenna In
terminal.
The digital tuner in this DTV receives HD signals
from an antenna. Digital signals from a STB are
received through a STB via the Component In jacks.
This DTV can receive ANY resolution being broad-
cast (HDTV, EDTV, or SDTV). However, ALL
resolutions are converted to 1080i for display.

Analog RF Antenna Connection

• Connect a Cable signal (with or without a cable
box) or RF antenna to the Analog RF input.
The analog tuner in this DTV receives Analog
Antenna signals, Analog Cable signals, or the RF
output from a VCR or cable box.
Analog Cable
VCR Back
TV Back
I
DTV will select the correct Antenna mode for the type of Analog RF
signal connected automatically.
I
Use "Antenna Selection" in the Setup menu to change the Antenna
Mode.
I
DTV will switch off automatically after 15 minutes if there is no
signal reception (cable out or station not broadcasting).
FIRST-THINGS-FIRST
OR
CATV FRANCHISE NOTE: Cable
companies, like public utilities,
are franchised by local govern-
ment authorities. To receive
cable programs, even with
equipment which is capable of
receiving cable channels, the
consumer must subscribe to
the cable company's service.
DTV Back
NOTES: If you do not have a VCR connect signal directly
to DTV 75 (UHF/ VHF/CATV) ohm terminal.
The only resolution available with any of these
connections, regardless of the original content, is
standard analog (SDTV).
Cable
Box
VCR Back
TV Back
NOTE: You cannot record
scrambled (premium) chan-
nels with this connection.
Exception—When the Video mode is selected, the DTV will not auto-
matically switch off when signal reception has stopped for 15 minutes.
I
If you move the DTV to a new location, press the RESET key twice
after connecting the signal and turning on the DTV.
Need help?
Visit our Web site at
RF
Antenna
OR
(Continued on next page.)
www.sanyoctv.com 1-800-877-5032
or Call
RF
Antenna
VCR Back
TV Back
5