Digital Av Connections; Connecting External Equipment To Hdmi Input With Hdcp; Connecting Stb Or Dvd With Dvi Output To; Hdmi Input With Hdcp - Sanyo HT32744 Manual De Instrucciones

This is the best option for picture and sound! Using the
HDMI connection, which has high-definition content pro-
tection, provides you with uncompressed digital video and
audio, Dolby Digital 5.1 or PCM sound. This connection
requires only one cable. As Real As It Gets!
CONNECTING EXTERNAL EQUIPMENT TO
HDMI (INCLUDES HDCP COPY PROTECTION)
To avoid problems with some brands of external equip-
ment, follow this procedure when connecting cables and
powering on your equipment.
1
Switch off DT V and external equipment before con-
necting cable. (Cable is not supplied.)
2
Connect the external equipment's high bandwidth
HDMI Output to the DTV's HDMI input.
3
The DTV must be turned on first, press POWER. Then
turn on your external equipment.
4
Press INPUT to select
HDMI to view a digital
program.
Set-Top Box (Can be a Digital Satellite Receiver,
DVD Player or similar digital device.)
HDMI Cable
cable into TV HDMI input
jack.)
Remote Control
4
3
19 Pin HDMI Digital Cable – 1
(Make sure you check the pin configura-
tion of the cable plug-end*)
*Adapter may be required. Check with
your local electronic store.
I
If the television HDMI pin configuration is different from the pin config-
uration on your set-top box, you will need to use an Adapter.
I
Press the INPUT key after connecting cables to access the AV Inputs.
There is NO need to tune to a blank channel.

DIGITAL AV CONNECTIONS

Back View of TV
2
(Gently insert
What you will need for connections:
CONNECTING STB WITH DVI OUTPUT TO
HDMI INPUT (OPTIONAL)
1
Switch off TV and external equipment before con-
necting cable. (Cable is not supplied.)
2
Connect the STB's DVI Output to a "DVI to HDMI
Cable;" then connect the cable to the DTV's HDMI
input.
NOTE: Check with your local electronic store for a
DVI to HDMI Cable that matches your equipment
and the DTV.
3
Connect the STB's Audio L / R to the DTV's Compo-
nent Audio 3 L / R.
4
The DTV must be turned on first, press POWER. Then
turn on your external equipment.
5
Press INPUT to select HDMI to view a digital program.
Set-Top Box (Can be a Digital Satellite Receiver,
DVD Player or similar digital device.)
What you will need for
connections:
DVI to HDMI Cable – 1
Audio Cable – 1
I
With a DVI connection, make sure you connect Audio out to the TV's
Compo 3 Audio in.
I
Because the Component (Compo 3) audio jacks are used to receive the
audio from the DVI device, the Compo 3 video jacks cannot be used
when a DVI device is connected.
Need help?
Visit our Web site at
3
2
5
www.sanyoctv.com 1-800-877-5032
or Call
Back View of TV
Remote Control
4
9