Analog Av Connections; Using The Analog Video Jacks To Connect A Vcr (Or Other Analog Device); Connecting Analog Audio Out Jacks To A Stereo Amplifier - Sanyo HT32744 Manual De Instrucciones

Ocultar thumbs Ver también para HT32744:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USING THE ANALOG VIDEO JACKS
TO CONNECT A VCR (OR OTHER
ANALOG DEVICE)
Switch off DTV and external equipment before connect-
ing cables. (Cables are not supplied.)
1
Connect VCR's Audio Video Out to the DTV's Video In
jacks.
NOTE: For Mono VCR (Single Audio Jack), connect VCR
Audio Out to DTV Audio (L) Input.
2 2
Optional
Connect VCR's S-Video Out to the DTV's S-Video In
Jack.
NOTE: S-Video jacks connection override Video jacks con-
nection.
3
Press POWER to turn on the DTV, then turn on exter-
nal equipment.
4
Press the INPUT to select VIDEO 1
or VIDEO 2 to view the VCR program.
Back View of VCR
1
DTV AV
INPUT Jacks
Remote Control
3
4

ANALOG AV CONNECTIONS

2 2
S-Video
Jack
NOTE: Composite jacks
offer only 480i (SDTV)
resolution.
What you will need
for connections:
Audio Video Cable – 1
S-Video Cable – 1
Need help?
CONNECTING ANALOG AUDIO OUT
JACKS TO A STEREO AMPLIFIER
Switch off DTV and external equipment before connect-
ing cables. (Cables are not supplied.)
1
Connect the DTV Audio Out (R/L) to the Stereo
Amplifier In (R/L).
2
Press POWER to turn on the DT V, then turn on
external equipment.
NOTES:
Do not connect external speakers directly to the DTV.
When "TV Speaker "is in the ON mode, sound will be repro-
duced through your DTV and stereo amplifier.
When "TV Speaker " is in the OFF mode, sound will be repro-
duced only through the stereo amplifier. (See page 24 to set
TV Speaker.)
What you will need for
connections:
Audio Cable – 1
1
Stereo Amplifier
I
Press INPUT key after connecting cables to access the VIDEO 1 or
VIDEO 2 input. There is NO need to tune to a blank channel.
I
VIDEO 1 and VIDEO 2 jacks have identical functions. Any com-
patible analog video device can be connected to either set of jacks.
I
"No Signal" will appear randomly on the screen when no signal is
detected at the VIDEO 1 or VIDEO 2 inputs.
I
Position your DTV at least 2 feet from stereo speakers. The
magnets in the speakers may affect the picture quality.
www.sanyoctv.com
Visit our Web site at
Back View of DTV
Remote Control
2
11
1-800-877-5032
or Call

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido