Using The Component Jacks To Connect A Dvd Player Or Other Digital Equipment; Connecting Digital Audio Out Jacks To A Multi-Channel Receiver - Sanyo HT32744 Manual De Instrucciones

USING COMPONENT JACKS TO
CONNECT A DVD PLAYER OR OTHER
DIGITAL EQUIPMENT
The Component Video jacks will accept HDTV, EDTV, or
SDTV video content.
Switch off DTV and external equipment before connect-
ing cables. (Cables are not supplied.) Follow these steps
to easily connect your STB or DVD to this DTV:
1
Connect DVD Player or similar digital equipment's
Component Video Out to the DTV's Component
Video Input jacks.
2
Connect DVD Player or similar digital equipment's
Audio Out to the DTV's Audio 3 Input jacks.
3
Press POWER to turn on the DTV, then turn on
external equipment.
4
Press the INPUT to select COMPONENT 3 or COM-
PONENT 2 to view the DVD program.
1
DTV Back
Component
Jacks
What you will need
for connections:
Component Video Cable – 1
Audio Cable – 1
I
COMPO 2 and COMPO 3 jacks have identical functions. Compatible
video devices can be connected to either set of jacks.
I
Press the INPUT key after connecting the cables, to select the
COMPO 2 or COMPO 3 input signal. There is NO need to tune to a
blank channel.
10
Need help?
Visit our Web site at
DIGITAL AV CONNECTIONS
DVD Player
(or similar digital
device such
as a Digital
Satellite
Receiver.)
2
Remote Control
3
4
www.sanyoctv.com 1-800-877-5032
or Call
CONNECTING DIGITAL AUDIO OUT
JACK TO A MULTI-CHANNEL
RECEIVER
®
Dolby Digital Audio provides 5.1 channels of surround
sound (five full-range channels [5] and one low-frequency
effect channel [.1]). A fiber optics cable is used to carry
the 5.1 surround sound (for low-noise signal transfer).
1
Using a Fiber Optics cable, connect the DTV's Digital
Audio Output to the Digital Audio Input of a Multi-
Channel Receiver. (Fiber optics cable is not supplied.)
2
Press POWER to turn on the DTV, then turn on exter-
nal equipment.
NOTES:
When making the connection, do not pinch or kink the fiber
optics cable.
Red light visible at the Digital Audio Output does not nec-
essarily indicate that Dolby 5.1 audio is available. Digital
audio is made up of light pulses that the human eye cannot
detect. Dolby 5.1 audio is available at the Digital Audio
Output only when received as part of a Digital signal.
1
Optical Digital
Cable
What you will need
for connections:
Optical Cable – 1
I
" No Signal" will appear randomly on the screen when no signal is
detected at the COMPO 2 or COMPO 3 inputs.
I
Position your DTV at least 2 feet from stereo speakers. The magnets
in the speakers may affect the picture quality.
Multi-Channel
Receiver
Back View
of DTV
Remote Control
2