Channel Setup Options; Channel Search; Digital Cable Search - Sanyo HT32744 Manual De Instrucciones

CHANNEL SETUP OPTIONS

CHANNEL SEARCH

Use Channel Search to replace existing Digital and Analog
Channel Scan databases, such as, if you move to another
city or have cable service installed.
NOTES: During Channel Search, current Digital and Analog
channel databases are deleted and new ones created.
To receive Digital Cable channels, you will have to
perform a Digital Cable Search.
To add new channels to existing databases, use Digital
Add-on Search on page 19.
1
Press the MENU key to display the Main menu.
Use the CURSOR LM keys to highlight the Channel
2
category . Press ENTER.
Use the CURSOR LM keys to highlight the Channel
3
Search option. Press ENTER.
Use the CURSOR M key to select Yes. Press
4
ENTER.
IMPORTANT FACT: This DTV maintains only one database of
digital channels. Therefore, when you search for ClearQAM
digital cable channels, the database of antenna digital channels
will be deleted. You will only be able to receive those Clear-
QAM channels your cable company provides.
Cable companies rearrange
virtual channels as program-
ming changes, which may
cause the program you are
watching to move
another channel. This message will appear on the screen
briefly to notify you of a change. You will have to relocate the
program you were watching by scanning through the channels.
To restore the antenna digital channel database, reconnect the
antenna and use the menu system to perform a normal
Channel Search.
18
Need help?
Visit our Web site at
to
www.sanyoctv.com
DIGITAL CABLE SEARCH (OPTIONAL)
This DTV can receive unscrambled (ClearQAM) digital
cable channels, when available. However, not all cable
companies provide ClearQAM digital channels.
Searching for digital cable channels will take about 10
minutes, please be patient.
1
Connect a Digital Cable signal
directly to the DTV Digital Antenna
In Terminal.
2
Press the TUNER key to select the
Digital Tuner.
3
Press the MENU key to display the Main menu.
4
Use the CURSOR LM keys to highlight the Channel
category. Press ENTER.
5
Use the CURSOR LM keys to highlight Digital
Cable Search option. Press ENTER.
6
Use the CURSOR M key to select Yes. Press
ENTER.
1-800-877-5032
or Call
NOTE: After Channel Search is complete, the
DTV will tune to the lowest Digital Cable
channel (or lowest Analog channel if no Digital
Cable channel is found).