Product Features; Charging The Battery - Black+Decker BDH2000L Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. On/off switch
2. Bowl release button
3. Charging indicator
4. Dust bowl
5. Nozzle
6. Nozzle release button
7. Nozzle rotating button
8. Extendable crevice tool
9. Flip-up Brush
10. Charger base
11. Charger
12. Cloth filter
13. Plastic pre-filter

Charging the battery

• Place the appliance on the charging base as shown.
• Plug in the charger. The charging indicator will flash
continuously (slowly).
• Leave the appliance to charge.
While charging, the charger may get warm, this is
perfectly normal and safe. The charging indicator will be
lit as long as the appliance is connected to the plugged-
in charger. It can remain on charge indefinitely without
damage or danger. It is not possible to "overcharge" the
battery cells with the charger provided.
WARNING:
battery at ambient temperatures below 39°F (4°C) or above 104°F (40°C).
The charge is complete when the charging indicator lights continuously. The charger
and the battery can be left connected indefinitely with the LED illuminated. The LED will
change to flashing (charging) state as the charger occasionally tops off the battery charge.
• Charge discharged batteries within 1 week. Battery life will be greatly diminished if
stored in a discharged state.
Battery diagnostics
If the appliance detects a weak battery, the charging indicator will flash at a fast rate.
Proceed as follows:
• Place the appliance on the charging base.
• Plug in the charger.
• Leave the appliance to charge.
If the appliance detects a damaged battery, the charging indicator will flash at a fast
rate when the appliance is on the charger base. Proceed as follows:

Product Features

Do not charge the
4
A

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Chv1410l

Tabla de contenido