Bronpi MADRID Serie Instrucciones De Utilizacion página 16

Ocultar thumbs Ver también para MADRID Serie:
Tabla de contenido

Publicidad

a) Quitar las tapas de cierre de las bocas de salida de aire
situadas en la parte superior del carter.
b) Fijar las boquillas o collarines de conexión, en el hueco o
huecos resultantes.
c) Realizar la perforación en las paredes o en la campana
existente, para que puedan pasar y aplicarse los tubos
flexibles (ignífugos) de diámetro 12cm, con sus bocas
correspondientes.
d) Fijar los tubos mediante abrazaderas metálicas a los
collares y rejillas correspondientes. Cada tubo no deberá
superar 3,5m. de longitud y deberá aislarse con materiales
aislantes, para evitar ruido y dispersión de calor.
e) Las rejillas se tienen que posicionar a una altura no inferior
a los 2 metros sobre el suelo para evitar que el aire caliente,
al salir, embista a las personas.
ENG The inserts are predisposed for the connection of two
additional exits of ventilation. We will have to realize the
following steps for it:
a)
To remove the lids of closing of the mouths of air exit
placed on the top part of the housing.
b)
To fix the mouthpieces or spigots of connection in the
hollow or resultant hollows.
c)
To realize the perforation in the walls or in the existing
hood, in order that they could pass and to use the flexible
(fireproof)
corresponding mouths.
d)
To fix the pipes by means of metallic claspers to the
spigots and corresponding grids. Every pipe will not have
to overcome 3,5m. Long and it will have to be isolated
with insulating materials, to avoid noise and heat
dispersion.
e)
The grids have to be positioned to a height not laver
than 2 m from the floor to avoid the hot air changes at a
person.
POR Os inseríveis estão predispostos para a para a conexão de duas
saídas adicionais de ventilação. As saídas estão situadas no
tecto do equipamento. Para isso deveremos realizar os
seguintes passos:
a)
Retirar as tampas das bocas de saída de ar situadas
na parte superior do carter.
b) Fixar as bocas de conexão do ar aos buracos
resultantes.
c)
Realizar a perfuração das paredes para que possam
passar e aplicar-se os tubos flexíveis (ignífugos) de
diâmetro 12cm, com as suas bocas correspondentes.
pipes
of
diameter
12cm,
with
their

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Canada serieCanada rusticoCanada vision

Tabla de contenido