Before First Use - IKEA Rengora Manual Del Usuario

ENGLISH
4. Press function button (C),
•• The indicators of function buttons (A)
and (B) go off.
•• The indicator of function button (C)
continues to flash.
•• The end indicator comes on.
5. Press function button (C). The end indi-
cator goes off, the acoustic signals are
deactivated.
6. Deactivate the appliance to confirm.
How to activate the acoustic signals
1. Refer to ‘'How to deactivate the acoustic
signals’', step (1) through (3).

Before first use

1. Make sure that the set level of the water
softener agrees with the water hardness
in your area. If not, adjust the water
softener. Contact your local water au-
thority to know the water hardness in
your area.
2. Fill the salt container.
Adjusting the water softener
German
degrees
(°dH)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
Water hardness
French mmol/l
degrees
(°fH)
91 - 125 9.1 - 12.5
76 - 90 7.6 - 9.0
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
2. Press function button (C),
•• The indicators of function buttons (A)
and (B) go off.
•• The indicator of function button (C)
continues to flash.
•• The end indicator is off.
3. Press function button (C). The end indi-
cator comes on, the acoustic signals are
active.
4. Deactivate the appliance to confirm.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the ap-
pliance. Start a programme to remove
them. Do not use detergent and do not
load the baskets.
Clarke
degrees
64 - 88
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
Water softener
adjustment
Manual Elec-
tronic
10
1)
2
9
1)
2
8
1)
2
7
1)
2
6
1)
2
1) 1)
2 5
1 4
1 3
1 2
2) 2)
1 1
8