ENGLISH
Product information
Product information
→ Fig.
Product information
1
Familiarising yourself with your appliance
Familiarising yourself with your appliance
Familiarising yourself with your appliance
Appliance
You can find an overview of the parts of your appliance here.
→ Fig.
2
Rating plate
1
Detergent dispenser
2
Bottom basket
3
Dispenser for special salt
4
Lower spray arm
5
Tablet collecting tray
6
Top basket
7
Cutlery drawer
8
LED
9
Cutlery shelf
10
Upper spray arm
11
Intake opening
12
Blow opening
13
Filter system
14
Dispenser for rinse aid
15
Features
You can find an overview of the possible features of your ap-
pliance and how to use them here.
These features depend on the model of your appliance.
Adjusting top basket with side levers
To wash large items of tableware in the baskets, adjust the
shelf position of the top basket.
-
→ Fig.
3
4
Before using for the first time
Before using for the first time
Before using for the first time
Performing the initial configuration
On initial start-up or after a reset to the factory settings, you
will need to make settings.
Requirement: The appliance has been installed and connec-
ted.
Add special salt.
1.
Add rinse aid.
2.
Switch on the appliance.
3.
Setting the water softening system.
4.
Rating plate with E number and FD number.
The data you need for Customer Service.
Add detergent to the detergent dispenser.
Bottom basket
Add special salt to the dispenser for special salt.
The lower spray arm washes the tableware in the bottom basket.
If the tableware has not been washed properly, clean the spray
arms.
During the wash cycle tablets automatically fall out of the deter-
gent dispenser into the tablet collecting tray where they can fully
dissolve.
Top basket
Cutlery drawer
Interior lighting of the appliance.
Cutlery shelf
The upper spray arm washes the tableware in the top basket.
If the tableware has not been washed properly, clean the spray
arms.
The intake opening is required for the Drying.
The blow opening is required for the Drying.
Filter system
Add rinse aid to the dispenser for rinse aid.
To download the full document, visit www.ikea.com
Reorganising cutlery drawer
You can fold down the side shelves and front prongs to
make more space for longer/wider items of cutlery.
-
→ Fig.
5
6
Folding down prongs
If you do not need the folding tines, fold them down.
→ Fig.
7
Set the amount of rinse aid to be dispensed.
5.
Add detergent.
6.
Start the Programme with the highest cleaning temperat-
7.
ure without tableware.
We recommend you clean the appliance without table-
ware before using it for the first time to remove any
marks from water or other residues.
Tip: You can change these settings and other Basic settings
at any time.
11