Weighing; Resetting The Scales; Cleaning - ADE BE 1806 Instrucciones De Operación

Weighing

Weighing
WARNING against injuries
− Do not step onto the scales with wet feet or when its surface is damp.
Risk of slipping!
1. Step once with a little force on the weighing surface (tap-on function).
In the illuminated display "0.0", as well as the set measuring unit e.g. "kg", is shown.
2. Position yourself on the scales. Remain standing still and do not hold on to
anything.
The measured weight will be displayed shortly thereafter.
A few seconds after you step off the weighing surface, the scales will switch off
automatically.
‚ Weigh yourself with as little clothing on as possible.
‚ Try to weigh yourself always at the same time and under consistent
conditions in order to obtain comparable values.

Resetting the scales

Reset the scales to factory settings if unusual or obviously incorrect values are shown
on the display.
1. Remove the batteries from the battery compartment and wait a moment.
2. Re-insert the batteries. Pay attention to the correct polarity of the batteries (+/-). The
plus pole (+) for both batteries must point upwards.
After switching the scales on, you can weigh yourself as usual.

Cleaning

NOTE on material damage
− Do not immerse the scales in water or other liquids.
− Do not under any circumstances use harsh, scraping, or abrasive
cleaning agents or the like to clean the scales. If you do, the surface
could be scratched.
− Wipe down the scales as needed using a lightly dampened, soft cloth.
− Disinfect the weighing surface from time to time using a suitable disinfecting
agent (available at specialist retailers and pharmacies).
18
Bathroom Scale BE 1806 | 1807