Installation - modbar Steam System Guía Sobre El Funcionamiento

BOILER
MODEL/SERIES V/Hz
GROUP
AC220-240V/50-60Hz
MODBAR
1GR / 2GR
AC208/60Hz
NEW STEAM
POWER CORD:
1 X BLUE (NEUTRAL)
3 X WIRES
220V
1 X BROWN (PHASE)
1 X YELLOW & GREEN (GROUND)
WARNING
In order to prevent cracks
or leakage: do not store or
install the Steam machine
in places where in boiler or
hydraulicsystem to freeze.
RATED
RATED POWER CORD
POWER INPUT
SIZE (mm²)
(A)
(W)
SEE ELECTRICAL
3306 14,4
CONNECTIONS
2704 13
FOR DETAILS
WARNING
THE DETAILS ON THE LEFT DESCRIBE
HOW TO CONNECT EACH WIRE TO THE PLUG.
RESPECT ALSO THE LOCAL SAFETY
REGULATIONS.
WARNING
For the connection of the
machine, it must be provided a
suitable disconnection device
near the installation, so that
in case of trip, it is possible to
operate the device near the
machine.

3. Installation

WARNING
Installation on the counter:
For cutting the counter refer to
cutting template placed inside
the package.
WARNING
Replace fuses with the same size,
type and rating F1 = 2A, 250V
WARNING
This machine should not be
installed in kitchens.
WARNING
The machine is intended to be
permanently connected to fixed
wiring, and it is mandatory that
a residual current device (RCD)
with a rated residual operating
current not exceeding 30mA is
installed.
9