Assigning The Ip Address To This Unit - Sony IPELA SNC-DF70N Manual De Instalación

Recommended power cable
24 V AC
Cable #24
(AWG) (0.22
mm)
Maximum 35
cable length (115)
(m (feet))
12 V DC
Cable #24
(AWG) (0.22
mm)
Maximum 12
cable length (39)
(m (feet))
20
GB

Assigning the IP Address to this Unit

#22 #20
#18
(0.33 (0.52 (0.83
mm) mm) mm)
60 100 150
(197) (328) (492)
#22 #20 #18
(0.33 (0.52 (0.83
mm) mm) mm)
18 30 50
(59) (99) (164)
Assigning the IP
Address to this Unit
To connect this unit to a network, you need
to assign a new IP address to the unit.
Before assigning the IP address, connect the
unit to a computer or a network (page 18).
You can assign the IP address in two ways:
• Using the setup program stored in
the supplied CD-ROM
For details on the operations, see
"Assigning the IP Address Using the Setup
Program" on page 21.
• Using the ARP (Address Resolution
Protocol) commands
Open the DOS window on the computer and
enter the specified ARP commands.
For details on the operations, see
"Assigning the IP Address to this Unit Using
ARP Commands" in the User's Guide stored
in the supplied CD-ROM.
Note
For determining the IP address to be
assigned to this unit, consult your system
administrator.