Worx WG153 Manual Del Usuario página 10

10” cortadora de cesped/ ribeteadora
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SymBOLS
To reduce the risk of injury, user
must read instruction manual
Ni-cd battery. separate collection,
and battery must be recycled
POSITEC Inc. has established
a partnership with the RBRC
Corporation to recycle any
Positec batteries with the
RBRC-call2recycle seal. For
environmental protection, please
do not discard batteries in the
trash. After the batteries' life
10
cycle is ended, then please call
1.800-822-8837 for a free service
that will properly dispose of the
battery.
10
Grass Trimmer/Edger
"
Edging
Trimming
ASSEmBLy
1. ASSEmBly oF THE mAiN HANdlE
(See Fig. A)
Align and insert the shaft into the upper
housing until a click can be heard. Make sure
the grooves are correctly matched (See Fig.A).
NoTE: make sure that the handle is
firmly locked in place
2. ASSEmBly oF THE SAFETy GuARd
(See Fig. B1, B2)
Remove a screw from the guard; attach the
safety guard to the trimmer head. Align the
guard so it slides into the slots located on the
trimmer head. Turn the tool over and secure
the safety guard onto the trimmer head with
the screw (a) provided.
OpERATION INSTRuCTIONS
wARNiNG! The charger and battery pack
are specially designed to work together so
do not attempt to use any other devices. Never
insert or allow metallic objects into your charger
or battery pack connections because of an
electrical failure and hazard will occur.
1. BEFoRE uSiNG youR CoRdlESS
GRASS TRimmER
The battery pack included is shipped
UNCHARGED. You must charge before first use.
The battery charger supplied was designed to
only charge the Ni-cd battery also supplied. Do
not use another battery charger.
2. CHARGiNG youR BATTERy PACk
The Ni-cd battery is protected against deep
discharging. When the battery is empty, the
machine will switch off by means of a protective
circuit: The trimmer head no longer rotates.
In a warm environment or after heavy use, the
battery pack may become too hot to permit
charging. Allow time for the battery to cool
down before recharging.
3. To REmovE oR iNSTAll BATTERy
PACk (See Fig. C1, C2)
Depress the battery release button to release
EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido