Main Menu Parameters; Configuring Additional Pool Profiles - Dolphin Wave Instrucciones De Uso

Main Menu Parameters

The Main Menu and the parameters are explained in the table below:
Parameter
Pool Profile
Filter State
Error Report
Statistics
Second Main Menu screen parameters:
Parameter
Clock Setup
Date Setup
Technician Mode
Language

Configuring Additional Pool Profiles

As noted previously, the Dolphin Wave can be configured for four different
pool types. The configured settings are stored in the MMI's memory. This
section describes how to configure additional pool settings.
To add a new pool configuration, proceed as follows:
1. Go to the Wave screen. "Pool A" is displayed as the currently defined
setting as shown in Figure 9.
Description
Press Select to go to the Pool Profile screen.
Selecting Pool Profile opens the Pool Profile
screen for four different pool types. Pool A is
the default setting.
Reports on the filter's condition.
• Clean: Filter bag is ready for use
• Full: Change/clean filter bag
The FILTER BAG warning light on the
console will also indicate that the filter bag
needs cleaning/replacing.
Displays information for Service Technician.
Press Select to review data on robot usage.
Description
Press Select to enter Clock Setup screen and
12/24 hour mode.
Date setup screen.
Technician screen with restricted access.
Language interface mode.
9