Manual Procedure For Configuring Pool Profiles - Dolphin Wave Instrucciones De Uso

Manual Procedure for Configuring Pool Profiles

1. From the Wave logo menu, press Menu.
2. From the Main Menu, with Pool Profile highlighted, press Select and
then modify, to display the current active profile screen.
3. Press Select to enter the Pool Length Setup screen.
Pool Length
Cycle Time
Navigation Mode
Scanning Path
select
Figure 11: Pool Length Setup screen
4. Using the Select and Scrolling buttons
for example:
5. With Pool Length highlighted, press Select. The Pool Length Set Up
screen is displayed:
25
set
6. Using the arrows,
scroll down to the next parameter, Cycle Time.
Cycle Time determines the duration of each cleaning cycle.
Pool A Profile
Pool Length Set Up
30 35 40
Figure 12: Pool length setup screen
, select the desired pool length. Press Select and
11
25 m
3 h
Rec. 1
Default
back
, set each parameter in turn,
50 60
back