Remote Control Unit - Dolphin Wave Instrucciones De Uso

power supply, unroll the entire cable and re-arrange it on the caddy
handle as required.
5. Preventive Maintenance (PM): should be performed on the Wave robot
pool cleaner, in order to keep it in good and long lasting working
condition. MAYTRONICS provides the parts required – as a dedicated PM
kit. The work and the service will be provided through the dealer. PM
service should be performed every 1,500 working hours or 1 year (the
earlier of the two).
6. A warning message to perform PM will appear on the MMI screen, when
applicable. It is obligatory that PM service will be performed. Please
contact your dealer. Failure to perform the PM service will void the
warranty.

Remote Control Unit

The remote control unit (RCU) is located on the MMI console and held in
position by a magnet. Pull it upwards gently to remove it from its base. When
the robot is in automatic operation, use the remote control to override the
robot's programmed direction settings.
When the robot is moving in a forward direction, the floating cable
follows the robot from its tail end.
The remote unit has a control range of 50 meters from the Caddy.
Using the Remote Unit:
1. To activate the remote unit, press the touch pad as indicated in the
diagram. Four activation lights are illuminated.
Figure 14: Remote Control Unit
15
Forward
On-the
spot
turning
Reverse
Touch
pad
On/Off
switch