Fueling The Unit; Operating The Engine - Allmand NIGHT-LITE PRO II Manual Del Operario

19

Fueling The Unit

To fuel
• Open the engine compartment access door to access the
fuel tank.
• Open the filler cap.
• Add fuel as needed. Refer to the engine
operator's manual for fuel recommendations.
See Specifications for fuel capacity.
NOTICE
Diesel fuel only. Use of gasoline could result in engine
damage.
NOTICE
Pressurized fueling is not allowed.

Operating The Engine

Before Operating
1. Perform pre-operation checks. See Pre-Operation
Checklist.
2. Make sure the unit is set up properly at the work site.
See Operation - Setting Up The Unit .
Engine Control Panels
CAT / Kubota / Mitsubishi Models
Compare Figure 20 with the table following.
22
20
A
B
Kohler Models
Compare Figure 21 with the table following.
21
A
B
C
LSC Models
Compare Figure 22 with the table following.
Key Switch
Hourmeter
Engine Start / Stop Switch
Hourmeter
Engine Indicator Lights