Setting The Downmix Mode; Setting The Tv Screen Setting; Setting Of The Bonus Code; Setting Of The Dvd-Audio Playback Mode - Alpine IVA-W200 Manual De Instrucciones

Setting the Downmix Mode

This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: SURROUND / STEREO
SURROUND: Surround compatible Downmix
STEREO: Stereo Downmix

Setting the TV Screen Setting

Use the procedure described below to modify the output screen
according to the type of TV monitor (rear monitor) being used.
This setting can also be applied for the IVA-W200.
If the rear monitor is not connected, the screen setting is 16:9.
Setting item: TV SCREEN
Setting contents: 4:3 LB / 4:3 PS / 16:9
• For some discs, the picture may not be set to the selected screen size.
(For details, refer to the explanation on the disc's jacket.)
4:3 LETTER BOX:
Select this when connected to a conventional 4:3 size (normal
TV aspect ratio) monitor. There may be black stripes visible at
the top and bottom of the screen (when playing a 16:9 size
movie). The width of these stripes will depend upon the original
aspect ratio of the theatrical release of the movie.
4:3 PAN-SCAN:
Select this when connected to a conventional 4:3 size monitor.
The picture will fill the entire TV screen. However, due to the
mismatch in aspect ratio, parts of the movie at the extreme left
and right sides will not be visible (when playing a 16:9 size
movie).
16:9 WIDE:
Select this when connected to a wide screen TV. This is the
factory setting.

Setting of the Bonus Code

Some DVD-Audio discs include bonus group.
The 4 digit code for the bonus group can be memorized.
Refer to the information on the jacket, etc., of the disc, for the
code number.
Setting item: BONUS CODE
Setting contents: CODE
1
Touch [CODE].
The 10 key input screen is displayed.
2
Input the 4 digit code number given on the jacket of
the disc, etc.
3
Touch [ENT] to memorize the number.

Setting of the DVD-Audio Playback Mode

Setting item: DVD-A SETUP
Setting contents: VIDEO / VCAP / VOFF
VIDEO: When both DVD-Video data and DVD-Audio data are
recorded on one disc, the DVD-Video data has
priority.
VCAP: The sound and the images are output, as well as the
DVD-Video.
VOFF: Only the sound data is output; images are not.

Setting the Video CD Play Mode

When playing a Playback Control (PBC) enabled Video CD, you
can choose to set PBC ON or OFF.
Setting item: PBC
Setting contents: ON / OFF
ON: The PBC menu is displayed.
OFF: The PBC menu is not displayed.
31
-EN