Publicidad
STEP 10 for OUTSIDE NON-INDICATOR ONLY.
For OUTSIDE INDICATOR, skip to STEP 11.
10
Install outside coin turn or cylinder.
Coin Turn Functions
10a Use template to mark and drill two (2) pilot holes.
10b Install the coin turn.
a.
Use level to
align template
with door edge.
Cylinder Functions
10a Insert key halfway into the cylinder, and install the
cylinder with ring and cylinder spring as shown.
10b Rotate cylinder clockwise.
For INSIDE INDICATOR trim, skip to STEP 13.
b.
Exterior
Key inserted halfway
Exterior
11
For Outside Indicator Trim ONLY –
Install outside indicator.
A. Trim the cam spindle if necessary (cylinder and privacy
functions).
Break the spindle at the appropriate mark according to door
thickness. (If necessary, remove clip.)
2" 1C\v"
1C\,"
B. IMPORTANT! Check indicator handing with indicator
positioned against top rim of reinforcement plate.
OUTSIDE
INDICATOR
Non-deadbolt functions*
Deadbolt functions and
L9040, L9044, L9056
* Except L9040, L9044, L9056
If necessary to change indicator handing, refer to steps on
page 8.
RH/RR
LH/LR
LH/LR
RH/RR
3
Publicidad
