Publicidad
13
For Inside Indicator Trim ONLY – Install inside indicator.
A. Trim the cam spindle if necessary (cylinder and privacy
functions).
Break the spindle at the appropriate mark according to door
thickness. (If necessary, remove clip.)
2" 1C\v"
1C\,"
B. IMPORTANT! Check indicator handing with indicator
positioned against top rim of reinforcement plate.
INSIDE
INDICATOR
Non-deadbolt functions*
Deadbolt functions and
L9040, L9044, L9056
* Except L9040, L9044, L9056
If necessary to change indicator handing, refer to steps on
page 8.
6
LH/LR
RH/RR
RH/RR
LH/LR
Cylinder Functions with Indicator
13a Unlock the door.
13b Install the indicator assembly.
DO NOT use power screwdriver.
DO NOT overtighten.
13c Install the indicator faceplate and cylinder with spring.
Indicator
faceplate
Key inserted
halfway
13d Rotate cylinder clockwise.
Interior
Publicidad
