Sony UP-DF500 Guía De Utilización página 21

3
Wipe the platen roller (black rubber roller) gently.
Platen roller (black rubber roll)
Wipe the platen roller gently with the wet pad
while turning it.
4
Wipe the pinch roller (dark blue rubber roller).
Pinch roller (dark blue rubber roller)
Wipe the pinch roller gently with the wet pad
while turning it.
5
Close the front cover.
6
Remove the film tray.
You can remove the film tray without pushing the
EJECT TRAY button when the power is off.
Note
When removing the film tray, hold both sides of the
film tray and the tray cover with both hands and
remove it.
7
Open the tray cover and wipe the separation rubbers
with the wet pad.
Separation
rubbers
8
Reset the film tray.
The cleaning has been completed.
Notes
• Be sure to perform the cleaning tasks in the order
described above.
• Close the cover after the wiped parts have dried
completely.
• Do not use the wet pad used for wiping rollers to clean
the thermal head.
7
Cleaning