Sony UP-DF500 Guía De Utilización página 26

When REMOVE FILM TRAY: J0 appears
1
Remove the film tray.
When the unit is not turned on, you can pull the film
tray out without pushing the EJECT TRAY button.
Note
When you pull out the film tray, hold both sides of
the film tray and the tray cover with both hands.
Note
If any printouts have been ejected onto the film tray,
remove them first before removing the film tray.
2
Remove the film jammed around the separation
rubbers.
3
Re-insert the film tray as it was.
When messages from J1 to J6 appear
1
Open the cover corresponding to the message and
remove the jammed film slowly while holding the
film with both hands.
Message
REMOVE FILM
REAR: J1
REMOVE FILM
REAR & TOP: J2
REMOVE FILM
TOP: J3
REMOVE FILM
TOP & FRONT: J4
REMOVE FILM
FRONT: J5
REMOVE FILM
TOP & INNER: J6
12
Troubleshooting
Cover to be opened
Rear cover
Rear and top cover
Top cover
Top and front cover
Front cover
Top and inner cover
When the rear cover is opened
When the top cover is opened
When the top and the front covers are
opened